8knob onto the pin to secure the pin.Fig.19Now slide the rip fence to the desired cutting radius,and tighten the bolt to secure it in place. Then movethe base all the way forward.NOTE:• Always use blades No. B-17, B-18, B-26 or B-27when cutting circles or arcs.Anti-splintering device (Optional accessory)Fig.20For splinter-free cuts, the anti-splintering device can beused. To install the anti-splintering device, move the toolbase all the way forward and fit it from the back of toolbase. When you use the cover plate, install theanti-splintering device onto the cover plate.CAUTION:• The anti-splintering device cannot be used whenmaking bevel cuts.Cover plate (Optional accessory)Fig.21Use the cover plate when cutting decorative veneers,plastics, etc. It protects sensitive or delicate surfacesfrom damage. Fit it on the back of the tool base.MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspectionor maintenance.• Never use gasoline, benzine, thinner, alcohol or thelike. Discoloration, deformation or cracks mayresult.To maintain product SAFETY and RELIABILITY, repairs,carbon brush inspection and replacement, any othermaintenance or adjustment should be performed byMakita Authorized Service Centers, always using Makitareplacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Jig saw blades• Hex wrench 3• Rip fence (guide rule) set• Anti-splintering device• Hose (For vacuum cleaner)• Cover plateNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.