Makita JV0600X1 Instruction Manual

Also see for JV0600: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

82) Circular cuts (Fig. 18 & 19)When cutting circles or arcs of 170 mm or less inradius, install the rip fence as follows.Insert the rip fence into the rectangular hole on theside of the base with the fence guide facing up.Insert the circular guide pin through either of the twoholes on the fence guide. Screw the threaded knobonto the pin to secure the pin.Now slide the rip fence to the desired cutting radius,and tighten the bolt to secure it in place. Then movethe tool base all the way forward.NOTE:• Always use blades No. B-17, B-18, B-26 or B-27 whencutting circles or arcs.Anti-splintering device (Optional accessory)(Fig. 20)For splinter-free cuts, the anti-splintering device can beused. To install the anti-splintering device, move the toolbase all the way forward and fit it from the back of toolbase. When you use the cover plate, install the anti-splin-tering device onto the cover plate.CAUTION:• The anti-splintering device cannot be used when mak-ing bevel cuts.Cover plate (Optional accessory) (Fig. 21)Use the cover plate when cutting decorative veneers,plastics, etc. It protects sensitive or delicate surfacesfrom damage. Fit it on the back of the tool base.MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspection ormaintenance.• Never use gasoline, benzine, thinner, alcohol or thelike. Discoloration, deformation or cracks may result.To maintain product SAFETY and RELIABILITY, repairs,carbon brush inspection and replacement, any othermaintenance or adjustment should be performed byMakita Authorized Service Centers, always using Makitareplacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita service center.• Jig saw blades• Hex wrench 3• Rip fence (guide rule) set• Anti-splintering device• Hose (For vacuum cleaner)• Cover plateNOTE:• Some items in the list may be included in the tool pack-age as standard accessories. They may differ fromcountry to country.ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (L pA ): 85 dB (A)Sound power level (LWA): 96 dB (A)Uncertainty (K): 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: cutting boardsVibration emission (ah, B): 10.5 m/s 2Uncertainty (K): 1.5 m/s2Work mode: cutting sheet metalVibration emission (ah, M ): 5.5 m/s 2Uncertainty (K): 1.5 m/s2ENG901-1• The declared vibration emission value has been mea-sured in accordance with the standard test method andmay be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect the oper-ator that are based on an estimation of exposure in theactual conditions of use (taking account of all parts ofthe operating cycle such as the times when the tool isswitched off and when it is running idle in addition tothe trigger time).ENH101-15For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsible manufac-turer declare that the following Makita machine(s):Designation of Machine: Jig SawModel No./ Type: JV0600are of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorizedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England18.11.2010Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN

/ 13

Related manuals for Makita JV0600

Makita JV0600 Instruction Manual

Makita JV0600K-R Instruction Manual

This manual is suitable for:

JV0600 JV0600X1

manualsdatabase

Your AI-powered manual search engine