Makita JV101DWYE Instruction Manual

Also see for JV101D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISHGeneral power tool safety warningsWARNING: Read all safety warnings and allinstructions. Failure to follow the warnings and instruc-tions may result in electric shock, fire and/or serious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Cordless jig saw safety warnings1. Hold power tool by insulated gripping sur-faces, when performing an operation wherethe cutting accessory may contact hidden wir-ing. Cutting accessory contacting a “live” wire maymake exposed metal parts of the power tool “live”and could give the operator an electric shock.2. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.3. Always use safety glasses or goggles.Ordinary eye or sun glasses are NOT safetyglasses.4. Avoid cutting nails. Inspect workpiece for anynails and remove them before operation.5. Do not cut oversize workpiece.6. Check for the proper clearance beyond theworkpiece before cutting so that the blade willnot strike the floor, workbench, etc.7. Hold the tool firmly.8. Make sure the blade is not contacting theworkpiece before the switch is turned on.9. Keep hands away from moving parts.10. Do not leave the tool running. Operate the toolonly when hand-held.11. Always switch off and wait for the blade tocome to a complete stop before removing theblade from the workpiece.12. Do not touch the blade or the workpiece imme-diately after operation; they may be extremelyhot and could burn your skin.13. Do not operate the tool at no-loadunnecessarily.14. Some material contains chemicals which maybe toxic. Take caution to prevent dust inhala-tion and skin contact. Follow material suppliersafety data.15. Always use the correct dust mask/respiratorfor the material and application you are work-ing with.SAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replacestrict adherence to safety rules for the subjectproduct. MISUSE or failure to follow the safetyrules stated in this instruction manual may causeserious personal injury.Important safety instructions forbattery cartridge1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product usingbattery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medical atten-tion right away. It may result in loss of youreyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 °C (122 °F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. The contained lithium-ion batteries are subjectto the Dangerous Goods Legislation require-ments.For commercial transports e.g. by third parties,forwarding agents, special requirement on pack-aging and labeling must be observed.For preparation of the item being shipped, consult-ing an expert for hazardous material is required.Please also observe possibly more detailednational regulations.Tape or mask off open contacts and pack up thebattery in such a manner that it cannot movearound in the packaging.11. Follow your local regulations relating to dis-posal of battery.SAVE THESE INSTRUCTIONS.CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries thathave been altered, may result in the battery burstingcausing fires, personal injury and damage. It willalso void the Makita warranty for the Makita tool andcharger.