Makita JV102D Instruction Manual

Also see for JV102D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

12 ENGLISHRip fenceOptional accessoryCAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore installing or removing accessories.Straight cutsWhen repeatedly cutting widths of 160 mm or less, useof the rip fence will assure fast, clean, straight cuts.► Fig.23: 1. Rip fence (Guide rule)To install, insert the rip fence into the rectangular holeon the side of the base with the fence guide facingdown. Slide the rip fence to the desired cutting widthposition, then tighten the bolt to secure it.► Fig.24: 1. Hex wrench 2. Bolt 3. Fence guide 4. Ripfence (Guide rule)Circular cutsWhen cutting circles or arcs of 170 mm or less in radius,install the rip fence as follows.► Fig.25: 1. Rip fence (Guide rule)1. Insert the rip fence into the rectangular hole on theside of the base with the fence guide facing up.2. Insert the circular guide pin through either of thetwo holes on the fence guide. Screw the threaded knobonto the pin to secure the pin.► Fig.26: 1. Threaded knob 2. Fence guide 3. Ripfence (Guide rule) 4. Pin3. Slide the rip fence to the desired cutting radius,and tighten the bolt to secure it in place. Then move thebase all the way forward.NOTE: Always use jig saw blades No. B-17, B-18,B-26 or B-27 when cutting circles or arcs.Anti-splintering deviceOptional accessoryCAUTION: The anti-splintering device cannotbe used when making bevel cuts.► Fig.27: 1. Base 2. Anti-splintering deviceFor splinter-free cuts, the anti-splintering device canbe used. To install the anti-splintering device, move thetool base all the way forward and fit it from the back oftool base.When you use the cover plate, install the anti-splinteringdevice onto the cover plate.Cover plateOptional accessory► Fig.28: 1. Cover plate 2. BaseUse the cover plate when cutting decorative veneers,plastics, etc. It protects sensitive or delicate surfacesfrom damage. Fit it on the back of the tool base.Guide rail adapter setOptional accessoryWhen cutting parallel and uniform width or cuttingstraight, the use of the guide rail and the guide railadapter will assure the production of fast and cleancuts. To install the guide rail adapter, insert the rulebar into the square hole of the base as far as it goes.Secure the bolt with the hex wrench securely.► Fig.29: 1. Hex wrench 2. Rule barInsert the rule bar into the square hole of the guide railadapter, and secure the screw firmly. Place the guiderail adapter on the guide rail.► Fig.30: 1. Guide rail adapter 2. Guide rail 3. ScrewNOTICE: Always use blades No. B-8, B-13, B-16,B-17 or 58 when using the guide rail and the guiderail adapter.MAINTENANCECAUTION: Always be sure that the tool isswitched off and the battery cartridge is removed beforeattempting to perform inspection or maintenance.NOTICE: Never use gasoline, benzine, thinner,alcohol or the like. Discoloration, deformation orcracks may result.To maintain product SAFETY and RELIABILITY,repairs, any other maintenance or adjustment shouldbe performed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONALACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Jig saw blades• Hex wrench 3• Rip fence (guide rule) set• Guide rail adapter set• Anti-splintering device• Hose (For vacuum cleaner)• Cover plate• Makita genuine battery and chargerNOTE: Some items in the list may be included in thetool package as standard accessories. They maydiffer from country to country.