Makita KP0800/2 Instruction Manual
Also see for KP0800: Instruction manualManualInstruction manualInstruction manualTechnical information
            |
5FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Adjusting depth of cut12010336Depth of cut may be adjusted by simply turning the knobon the front of the tool so that the pointer points thedesired depth of cut.Switch action12010172CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly and returnsto the "OFF" position when released.For tool with lock buttonCAUTION:• Switch can be locked in "ON" position for ease ofoperator comfort during extended use. Applycaution when locking tool in "ON" position andmaintain firm grasp on tool.To start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For continuous operation, pull the switch trigger and thenpush in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.For tool with lock-off buttonTo prevent the switch trigger from being accidentallypulled, a lock-off button is provided.To start the tool, depress the lock-off button and pull theswitch trigger. Release the switch trigger to stop.Foot1 2 3010173After a cutting operation, raise the back side of the tooland a foot comes under the level of the rear base. Thisprevents the tool blades to be damaged.ASSEMBLYCAUTION:• Always be sure that the tool is switched off andunplugged before carrying out any work on the tool.Removing or installing planer bladesCAUTION:• Tighten the blade installation bolts carefully whenattaching the blades to the tool. A loose installationbolt can be dangerous. Always check to see theyare tightened securely.• Handle the blades very carefully. Use gloves orrags to protect your fingers or hands whenremoving or installing the blades.• Use only the Makita wrench provided to remove orinstall the blades. Failure to do so may result inovertightening or insufficient tightening of theinstallation bolts. This could cause an injury.For tool with conventional planer blades12002564123450025551. Bolt2. Drum3. Planer blade4. Drum cover5. Adjusting plate1. Socket wrench2. Bolt1. Planer blade2. Rear base3. Foot1. Lock button orLock-off button2. Switch trigger1. Pointer2. Knob |
Related manuals for Makita KP0800
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
manualsdatabase
Your AI-powered manual search engine