Makita KP0800 Instruction Manual

Also see for KP0800: Instruction manual Manual Instruction manual Instruction manual Technical information

Contents

39. If operating a power tool in a damp location isunavoidable, use a residual current device(RCD) protected supply. Use of an RCD reducesthe risk of electric shock.10. Use of power supply via a RCD with a ratedresidual current of 30mA or less is alwaysrecommended.Personal safety11. Stay alert, watch what you are doing and usecommon sense when operating a power tool.Do not use a power tool while you are tired orunder the influence of drugs, alcohol ormedication. A moment of inattention whileoperating power tools may result in seriouspersonal injury.12. Use personal protective equipment. Alwayswear eye protection. Protective equipment suchas dust mask, non-skid safety shoes, hard hat, orhearing protection used for appropriate conditionswill reduce personal injuries.13. Prevent unintentional starting. Ensure theswitch is in the off-position before connectingto power source and/or battery pack, pickingup or carrying the tool. Carrying power tools withyour finger on the switch or energising power toolsthat have the switch on invites accidents.14. Remove any adjusting key or wrench beforeturning the power tool on. A wrench or a key leftattached to a rotating part of the power tool mayresult in personal injury.15. Do not overreach. Keep proper footing andbalance at all times. This enables better controlof the power tool in unexpected situations.16. Dress properly. Do not wear loose clothing orjewellery. Keep your hair, clothing, and glovesaway from moving parts. Loose clothes,jewellery or long hair can be caught in movingparts.17. If devices are provided for the connection ofdust extraction and collection facilities,ensure these are connected and properly used.Use of dust collection can reduce dust-relatedhazards.Power tool use and care18. Do not force the power tool. Use the correctpower tool for your application. The correctpower tool will do the job better and safer at therate for which it was designed.19. Do not use the power tool if the switch doesnot turn it on and off. Any power tool that cannotbe controlled with the switch is dangerous andmust be repaired.20. Disconnect the plug from the power sourceand/or the battery pack from the power toolbefore making any adjustments, changingaccessories, or storing power tools. Suchpreventive safety measures reduce the risk ofstarting the power tool accidentally.21. Store idle power tools out of the reach ofchildren and do not allow persons unfamiliarwith the power tool or these instructions tooperate the power tool. Power tools aredangerous in the hands of untrained users.22. Maintain power tools. Check for misalignmentor binding of moving parts, breakage of partsand any other condition that may affect thepower tool’s operation. If damaged, have thepower tool repaired before use. Many accidentsare caused by poorly maintained power tools.23. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.24. Use the power tool, accessories and tool bitsetc. in accordance with these instructions,taking into account the working conditionsand the work to be performed. Use of the powertool for operations different from those intendedcould result in a hazardous situation.Service25. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.26. Follow instruction for lubricating andchanging accessories.27. Keep handles dry, clean and free from oil andgrease. GEB010-4PLANER SAFETY WARNINGS1. Wait for the cutter to stop before setting thetool down. An exposed cutter may engage thesurface leading to possible loss of control andserious injury.2. Hold the power tool by insulated grippingsurfaces only, because the cutter may contactits own cord. Cutting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.3. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.4. Rags, cloth, cord, string and the like shouldnever be left around the work area.5. Avoid cutting nails. Inspect for and remove allnails from the workpiece before operation.6. Use only sharp blades. Handle the blades verycarefully.

/ 12

Related manuals for Makita KP0800

Makita KP0800 Instruction Manual

This manual is suitable for:

KP0800

manualsdatabase

Your AI-powered manual search engine