Makita KP0810 Instruction Manual

Also see for KP0810: Parts Breakdown Instruction manual Instruction manual Instruction manual Instruction manual

Contents

6(A) (B)(B)(A) (B)(A)(A) Front base (Movable shoe)(B) Rear base (Stationary shoe)Correct settingNicks in surfaceGouging at startGouging at endAlthough this side view cannotshow it, the edges of the bladesrun perfectly parallel to the rearbase surface.Cause: One or both blades fails tohave edge parallel to rearbase line.Cause: One or both blade edgesfails to protrude enough inrelation to rear base line.Cause: One or both blade edgesprotrudes too far in relationto rear base line.EN0004-1Change of chip discharge direction12007643Chip discharge direction can be changed to the right orleft. To change the direction, pull out the stopper whileturning it slightly backward and fit in it in one of twoopenings on the opposite side of chip discharge so thatthe recessed part fits to protrusion.12007801Dust bag (accessory)1 2007687Attach the dust bag onto the chip discharge opening.The chip discharge opening is tapered. When attachingthe dust bag, push it onto the chip discharge openingfirmly as far as it will go to prevent it from coming offduring operation.When the dust bag is about half full, remove the dustbag from the tool and pull the fastener out. Empty thedust bag of its contents, tapping it lightly so as to removeparticles adhering to the insides which might hamperfurther collection.1. Dust bag2. Chip dischargeopening1. Recessed part2. Protrusion1. Stopper2. Chip dischargeopening

/ 32

Related manuals for Makita KP0810

Makita KP0810 Instruction Manual

Makita KP0810C Instruction Manual

This manual is suitable for:

KP0810 KP0810K

manualsdatabase

Your AI-powered manual search engine