Makita KP0810 Instruction Manual
Also see for KP0810: Instruction manualParts BreakdownInstruction manualInstruction manualInstruction manual
            | |
8Dust bag (accessory)1 2007687Attach the dust bag onto the chip discharge opening. Thechip discharge opening is tapered. When attaching thedust bag, push it onto the chip discharge opening firmlyas far as it will go to prevent it from coming off duringoperation.When the dust bag is about half full, remove the dust bagfrom the tool and pull the fastener out. Empty the dustbag of its contents, tapping it lightly so as to removeparticles adhering to the insides which might hamperfurther collection.1007802NOTE:• If you connect a Makita vacuum cleaner to this tool,more efficient and cleaner operations can beperformed.Connecting a vacuum cleaner1007644When you wish to perform clean planing operation,connect a Makita vacuum cleaner to your tool. Thenconnect a hose of the vacuum cleaner to the chipdischarge opening as shown in the figures.Elbow (optional accessory)1007645Use of elbow allows change of chip discharge direction toperform cleaner work.Install the elbow (optional accessory) on the tool by justslipping on it. To remove it, just pull it out.OPERATIONHold the tool firmly with one hand on the knob and theother hand on the switch handle when performing the tool.Planing operation1 2007646First, rest the tool front base flat upon the workpiecesurface without the blades making any contact. Switchon and wait until the blades attain full speed. Then movethe tool gently forward. Apply pressure on the front of toolat the start of planing, and at the back at the end ofplaning. Planing will be easier if you incline the workpiecein stationary fashion, so that you can plane somewhatdownhill.The speed and depth of cut determine the kind of finish.The power planer keeps cutting at a speed that will notresult in jamming by chips. For rough cutting, the depth ofcut can be increased, while for a good finish you shouldreduce the depth of cut and advance the tool more slowly.Shiplapping (Rabbeting)0025801. Start2. End1. Elbow1. Vacuum cleaner1. Fastener1. Dust bag2. Chip dischargeopening |
Related manuals for Makita KP0810
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810C Instruction Manual
manualsdatabase
Your AI-powered manual search engine