10b a 1007828MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspectionor maintenance.• Never use gasoline, benzine, thinner, alcohol orthe like. Discoloration, deformation or cracks mayresult.Replacing carbon brushes1001145Remove and check the carbon brushes regularly.Replace when they wear down to the limit mark. Keepthe carbon brushes clean and free to slip in the holders.Both carbon brushes should be replaced at the sametime. Use only identical carbon brushes.Use a screwdriver to remove the rear cover.1 2007651Take out the worn carbon brushes, insert the new onesand secure the rear cover.1007652To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• High-speed steel Planer blade• Tungsten-carbide Planer blade (For longer bladelife)• Mini planer blade• Sharpening holder assembly• Blade gauge• Set plate set• Edge fence (Guide rule)• Dressing stone• Dust bag assembly• Elbow• Socket wrench• Chamfering rule assemblyNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Carbon brushes1. Screwdriver2. Rear cover1. Limit mark1. Edge ofchamfering rule