Makita LS1013 Instruction Manual

Also see for LS1013: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

18and WAIT UNTIL THE BLADE HAS COME TO A COM-PLETE STOP before returning the blade to its fully ele-vated position.CAUTION:• Firmly tighten the knob clockwise so that the carriagewill not move during operation. Insufficient tighteningmay cause unexpected kickback of the blade. Possibleserious PERSONAL INJURY may result.2. Slide (push) cutting (cutting wide workpieces)Loosen the knob counterclockwise so that the carriagecan slide freely. Secure the workpiece with the vise. Pullthe carriage toward you fully. Switch on the tool withoutthe blade making any contact and wait until the bladeattains full speed. Press down the handle and PUSHTHE CARRIAGE TOWARD THE GUIDE FENCE ANDTHROUGH THE WORKPIECE. When the cut is com-pleted, switch off the tool and WAIT UNTIL THE BLADEHAS COME TO A COMPLETE STOP before returningthe blade to its fully elevated position.CAUTION:• Whenever performing the slide cut, FIRST PULL THECARRIAGE TOWARD YOU FULLY and press down thehandle to the fully lowered position, then PUSH THECARRIAGE TOWARD THE GUIDE FENCE. NEVERSTART THE CUT WITH THE CARRIAGE NOT FULLYPULLED TOWARD YOU. If you perform the slide cutwithout pulling the carriage fully or if you perform theslide cut toward your direction, the blade may kickbackunexpectedly with the potential to cause seriousPERSONAL INJURY.• Never perform the slide cut with the handle locked in thelowered position by pressing the stopper pin.• Never loosen the knob which secures the carriage whilethe blade is rotating. This may cause serious injury.3. Miter cuttingRefer to the previously covered “Adjusting the miterangle”.1. Knob1001553

/ 36

Related manuals for Makita LS1013

Makita LS1013 Instruction Manual

This manual is suitable for:

LS1013

manualsdatabase

Your AI-powered manual search engine