Makita LS1016 Instruction Manual
Also see for LS1016: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                                                                                                            | |
9SPECIFICATIONSModel LS1016/LS1016L/LS1016F/LS1016FLBlade diameterFor all countries other than European countries 255 mm - 260 mmFor European countries 260 mmHole diameterFor all countries other than European countries 25.4 mmFor European countries 30 mmMax. Cutting capacities (H x W) with 260 mm in diameterBevel angleMiter angle 45° (left) 0° 45° (right)42 mm x 310 mm 68 mm x 310 mm 29 mm x 310 mm0° 58mm x 279 mm 91 mm x 279 mm 43 mm x 279 mm42 mm x 218 mm 68 mm x 218 mm 29 mm X 218 mm45°(right and left) 58 mm x 197 mm 91 mm x 197 mm 43 mm x 197 mm68 mm x 190 mm52°(right and left) - 91 mm x 171 mm -68 mm x 155 mm60°(right) - 91 mm x 139 mm -Special Max. Cutting capacitiesCrown molding 45 ﾟ type(with Crown molding stopper used) 168 mmBase board (H)(with Horizontal vise used) 120 mmNo load speed (min -1) 3,200Laser Type (LS1016L, LS1016FL) Red Laser 650 nm, 1.6mW ( Laser Class 2M )Dimensions (L x W x H) 718 mm x 640 mm x 671 mmNet weightFor all countries other than European countries LS1016 …..23.6 kgLS1016L/LS1016F …..23.7 kgLS1016FL.….23.8 kgFor European countries LS1016 ….24.1 kgLS1016L/LS1016F …..24.2 kgLS1016FL.….24.3 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END210-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ To avoid injury from flying debris, keepholding the saw head down, aftermaking cuts, until the blade has come toa complete stop.･ When performing slide cut, first pullcarriage fully and press down handle,then push carriage toward the guidefence.･ Do not place hand or fingers close to theblade.･ Never look into the laser beam. Directlaser beam may injure your eyes.･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric and |
Related manuals for Makita LS1016
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
Makita LS1016 Instruction Manual
manualsdatabase
Your AI-powered manual search engine