Repair P 6 / 8< 5 > Fastening of hex lock nut M8x13Turn base has to be so fastened and adjusted with hex lock nut M8x13 that it can turn without trembling.See Fig. 16.For adjusting and fastening, employ socket wrench 13 which is supplied with this product.< 4 > Mounting slide platesAligning with the circle portion (on which turn base slides.) of base, mount slide plates as illustrated in Fig. 15.And then, apply MAKITA grease N. No.1 to the slide plates.Fig. 15Slide platesHex lock nut M8x13Hex bolt M8x30Flat washer 8Turn baseFig. 16

Makita LS1040F Technical Information

LS1040F

save these instructions

miter angle

specifications

additional safety rules

functional description

general power tool safety warnings

miter saw safety warnings

adjusting the miter angle

dust bag

adjusting the cutting angle

replacing carbon brushes

optional accessories

Plaque auxiliaire

Boulon hexagonal

Socle

Lampe