Makita LS1040S Instruction Manual

Also see for LS1040: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

6INSTALLATIONInstalling auxiliary plate1230126581 23 4001832Install the auxiliary plate using the notch in the tool's baseand secure it by tightening the hex bolt.Installing the holders1012653123012652Install the holders on both sides of the base and securethem with screws.Adjust the adjusters so that they contact the floor surface.NOTE:In some countries, the holders may not have feet.Bench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stopperpin by lowering the handle slightly and pulling the stopperpin.1001792This tool should be bolted with two bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1001856FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Blade guard1001860When lowering the handle, the blade guard risesautomatically. The guard is spring loaded so it returns toits original position when the cut is completed and thehandle is raised. NEVER DEFEAT OR REMOVE THEBLADE GUARD OR THE SPRING WHICH ATTACHESTO THE GUARD.In the interest of your personal safety, always maintainthe blade guard in good condition. Any irregular1. Blade guard1. Bolt1. Stopper pin1. Holder2. Adjuster3. Screw1. Holder1. Auxiliary plate2. Base3. Hex bolt4. Nut1. Auxiliary plate2. Hex bolt3. Base

/ 16

Related manuals for Makita LS1040

Makita LS1040 Instruction Manual

This manual is suitable for:

LS1040 LS1040N/1 LS1040N/2 LS1040S

manualsdatabase

Your AI-powered manual search engine