Makita LW1400 Technical Information

Also see for LW1400: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

5-3-5 Guide plate5-3-5-1 Disassembling (LW1400’s case)Fig. 5-11) Loosen Knob 40 (72) and thenremove Guide plate (73) fromBase (86).Fig. 4-55) Remove Retaining ring S-8 (87) and Retaining ringS-16 (90) with 1R291.Retaining ring S-16 (90)Retaining ring S-8 (87)1R291Pin 16 (89)Vise plate (92)Fig. 4-66) The components of Vise ass’y (119) is as follows.Note: Be careful of the direction for each part.wide narrowPin 16 (89) hasto be assembledas shown in thefigure on theleft.Flat washer 8 (88) Flat washer 8 (91)Knob 40 (72)Fig. 5-22) Remove Lever 125 (101) byloosening M5x6 H.S.Set screw(100). Then remove M10x20Collar bolt (71).M5x6 H.S.Setscrew (100)M10x20 Collarbolt (71)Fig. 5-33) Remove Stop ring E-8 (110) witha slotted screwdriver like turningand prying it.Note: Be sure not to lose Stop ring.Guide plate (73)Lever 125 (101)Makita Corporation 9 / 15