Makita LXNJ01 Instruciton Manual

Contents

8Replacing carbon brushes1001145Remove and check the carbon brushes regularly.Replace when they wear down to the limit mark. Keepthe carbon brushes clean and free to slip in the holders.Both carbon brushes should be replaced at the sametime. Use only identical carbon brushes.Insert the top end of slotted bit screwdriver into thenotch in the tool and remove the holder cap cover bylifting it up.1 23013281Use a screwdriver to remove the brush holder caps.Take out the worn carbon brushes, insert the new onesand secure the brush holder caps.12013282Reinstall the holder cap cover on the tool.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Die• Punch• Hex wrench• Wrench 32• Makita genuine battery and chargerNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.MAKITA LIMITED ONE YEAR WARRANTYWarranty PolicyEvery Makita tool is thoroughly inspected and testedbefore leaving the factory. It is warranted to be free ofdefects from workmanship and materials for the periodof ONE YEAR from the date of original purchase.Should any trouble develop during this one year period,return the COMPLETE tool, freight prepaid, to one ofMakita’s Factory or Authorized Service Centers. Ifinspection shows the trouble is caused by defectiveworkmanship or material, Makita will repair (or at ouroption, replace) without charge.This Warranty does not apply where:IN NO EVENT SHALL MAKITA BE LIABLE FOR ANYINDIRECT, INCIDENTAL OR CONSEQUENTIALDAMAGES FROM THE SALE OR USE OF THEPRODUCT. THIS DISCLAIMER APPLIES BOTHDURING AND AFTER THE TERM OF THISWARRANTY.MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIEDWARRANTIES, INCLUDING IMPLIED WARRANTIESOF "MERCHANTABILITY" AND "FITNESS FOR ASPECIFIC PURPOSE," AFTER THE ONE YEAR TERMOF THIS WARRANTY.This Warranty gives you specific legal rights, and youmay also have other rights which vary from state tostate. Some states do not allow the exclusion orlimitation of incidental or consequential damages, sothe above limitation or exclusion may not apply to you.Some states do not allow limitation on how long animplied warranty lasts, so the above limitation may notapply to you.repairs have been made or attempted by others:repairs are required because of normal wear andtear:the tool has been abused, misused or improperlymaintained:alterations have been made to the tool.EN0006-11. Brush holdercap2. Screwdriver1. Holder capcover2. Notch3. Screwdriver1. Limit mark