Makita LXT DDF343SHE3 Instruction Manual

Also see for DDF343: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

3ENGLISH (Original instructions)Explanation of general view1-1. Red indicator1-2. Button1-3. Battery cartridge2-1. Star marking3-1. Switch trigger4-1. Reversing switch lever5-1. Speed change lever6-1. Adjusting ring6-2. Graduation6-3. Pointer7-1. SleeveSPECIFICATIONSModel DDF343 DDF453Steel 10 mm 13 mmWood 25 mm 36 mmWood screw 5.1 mm x 63 mm 6 mm x 75 mmCapacitiesMachine screw 6 mmHigh (2) 0 - 1,300No load speed (min -1) Low (1) 0 - 400Overall length 192 mm 214 mmNet weight 1.4 kg 1.6 kgRated voltage D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003ENE034-1Intended useThe tool is intended for drilling and screw driving inwood, metal and plastic. ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Model DDF343Sound pressure level (LpA) : 70 dB (A) or lessUncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A)Model DDF453Sound pressure level (LpA) : 72 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-17For European countries onlyEC Declaration of ConformityMakita declares that the following Machine(s):Designation of Machine:Cordless Driver DrillModel No./ Type: DDF343,DDF453