Makita LXTP01 Instruction Manual

Also see for LXTP01: Technical information

Contents

Makita LXTP01 Instruction Manual Manual pdf 5 page image

5FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before adjusting orchecking function on the tool.Installing or removing battery cartridge12 3011981• Always switch off the tool before installing orremoving of the battery cartridge.• To remove the battery cartridge, slide it from the toolwhile sliding the button on the front of the cartridge.• To install the battery cartridge, align the tongue onthe battery cartridge with the groove in the housingand slip it into place. Always insert it all the wayuntil it locks in place with a little click. If you can seethe red indicator on the upper side of the button, it isnot locked completely. Install it fully until the redindicator cannot be seen. If not, it may accidentallyfall out of the tool, causing injury to you or someonearound you.• Do not use force when installing the batterycartridge. If the cartridge does not slide in easily, itis not being inserted correctly.Safety systemWARNING:• Make sure all safety systems are in working orderbefore operation. Failure to do so may causepersonal injuries.1 2007726Test safety systems for possible faulty operation beforepin-nailing as follows.1. Make sure that the tool is not loaded with pin nailsbefore the test.2. Pull the sliding door of the magazine towardyourself.10119383. The tool accidentally operates if only the trigger ispulled although the lever is not pulled.4. The tool does not operate when the trigger ispulled with the lever pulled.In case of 3 and 4 above, the safety systems are faulty.Trigger and leverCAUTION:• Before inserting the battery cartridge into the tool,always check to see that the switch trigger actuatesproperly and returns to the "OFF" position whenreleased.1007728The tool is provided with lever as a safety system inaddition to the usual trigger.1007729To fire pin-nails, first pull the lever and then pull thetrigger.Adjusting the depth of pin-nailingWARNING:• Always make sure that your fingers are not placedon the trigger or the lever and the battery cartridgeis removed before loading the pin nailer.1. Trigger1. Lever1. Sliding door1. Trigger2. Lever1. Red indicator2. Button3. Battery cartridge