Makita M2401 Instruction Manual

Also see for M2401: Instruction manual Instruction manual Instruction manual Instruction manual

5 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: M2401Wheel diameter 355 mmMax. wheel thickness 3 mmHole diameter 25.4 mmNo load speed 3,800 min -1Dimensions (L x W x H) 500 mm x 280 mm x 620 mmNet weight 14.3 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003• The shape and weight vary depending on the specifications which differ country to country.SymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Wear safety glasses.Read instruction manual.DOUBLE INSULATIONOnly for EU countriesDo not dispose of electric equipmenttogether with household waste material! Inobservance of the European Directive, onWaste Electric and Electronic Equipmentand its implementation in accordance withnational law, electric equipment that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.Intended useThe tool is intended for cutting in ferrous materials withappropriate abrasive cut-off wheel. Follow all laws andregulations regarding dust and work area health andsafety in your country.Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term “power tool” in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety1. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.2. Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of elec-tric shock if your body is earthed or grounded.3. Do not expose power tools to rain or wet con-ditions. Water entering a power tool will increasethe risk of electric shock.