Makita M6000 Instruction Manual

Also see for M6000: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita M6000 Instruction Manual Manual pdf 3 page image

3ENGLISH (Original instructions)Explanation of general view1-1. Switch trigger1-2. Lock button2-1. Reversing switch lever3-1. Chuck key4-1. Sleeve4-2. RingSPECIFICATIONSModel M6000 M6001 M6002Steel 10 mm 10 mm 10 mmCapacities Wood 25 mm 25 mm 25 mmNo load speed (min -1) 3,000 0 - 3,000 0 - 3,000Overall length 229 mm 229 mm 234 mmNet weight 1.3 kg 1.3 kg 1.3 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003ENE032-1Intended useThe tool is intended for drilling in wood, metal and plastic.ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 77 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: drilling into metalVibration emission (ah,D) : 3.0 m/s 2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-18For European countries onlyEC Declaration of ConformityMakita declares that the following Machine(s):Designation of Machine:DrillModel No./ Type: M6000, M6001, M6002Conforms to the following European Directives:2006/42/ECThey are manufactured in accordance with the followingstandard or standardized documents:EN60745The technical file in accordance with 2006/42/EC isavailable from:Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium1.12.2014000331Yasushi FukayaDirectorMakita, Jan-Baptist Vinkstraat 2, 3070, Belgium