Makita MKP080 Instruction Manual
                            | |
4･ no load speed･ Class II Construction･ revolutions or reciprocation per minuteFUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Adjusting depth of cut004839Depth of cut may be adjusted by simply turning the knobon the front of the tool.Switch action12004884CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.For tool without lock button and lock-off buttonTo start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For tool with lock buttonTo start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For continuous operation, pull the switch trigger andthen push in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.For tool with lock-off buttonTo prevent the switch trigger from being accidentallypulled, a lock-off button is provided. To start the tool,press the lock-off button and pull the switch trigger.Release the switch trigger to stop.ASSEMBLYCAUTION:• Always be sure that the tool is switched off andunplugged before carrying out any work on thetool.Removing or installing planer bladesCAUTION:• Tighten the blade installation bolts carefully whenattaching the blades to the tool. A loose installationbolt can be dangerous. Always check to see theyare tightened securely.• Handle the blades very carefully. Use gloves orrags to protect your fingers or hands whenremoving or installing the blades.• Use only the Makita wrench provided to remove orinstall the blades. Failure to do so may result inovertightening or insufficient tightening of theinstallation bolts. This could cause an injury.For tool with mini planer blades1. Remove the existing blade, if the tool has been inuse, carefully clean the drum surfaces and thedrum cover. To remove the blades on the drum,unscrew the three installation bolts with the socketwrench. The drum cover comes off together withthe blades.0048411. Lock button /Lock-off button2. Switch trigger |
Related manuals for Makita MKP080
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
Makita KP0800 Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine