8 ENGLISHOPERATIONUsing the English valve adapter1. Unfold the air chuck clamp.2. Insert the English valve adapter into the air chuck.3. Fold the air chuck clamp firmly.1 2 34► 1. English valve adapter 2. Air chuck 3. Air chuckclamp 4. Valve stem4. Attach the English valve adapter to the valve stemwhile opening the English valve adapter.5. Turn on the tool.6. Inflate the tire by pulling the switch trigger whilechecking the status of the tire.NOTICE: When using the English valve adapter,the pressure gauge will not display an accurate valuedue to characteristics of the valve. When inflating atire, do not use the value on the pressure gauge, butinflate it by checking the status of the tire.If the tool stops before the tire reaches the desired air pres-sure, adjust the pressure value, and then inflate the tire again.Using the Schrader valve adapter1. Unfold the air chuck clamp.2. Attach the air chuck to the valve stem.123► 1. Air chuck clamp 2. Valve stem 3. Air chuck3. Fold the air chuck clamp firmly.4. Turn on the tool, and then set the pressure valueappropriate for the tire using the pressure gauge.5. Keep pulling the switch trigger until the tool stops.The tire is inflated with the specified pressure.Using the Presta valve adapter1. Loosen the locking nut on the valve stem.1► 1. Locking nut2. Unfold the air chuck clamp.3. Attach the Presta valve adapter to the valvestem, and then attach the air chuck to the Presta valveadapter.21 34► 1. Presta valve adapter 2. Air chuck 3. Air chuckclamp 4. Valve stem4. Fold the air chuck clamp firmly.5. Turn on the tool, and then set the pressure valueappropriate for the tire using the pressure gauge.6. Keep pulling the switch trigger until the tool stops.The tire is inflated with the specified pressure.7. Remove the air chuck and Presta valve adapter,and then tighten the locking nut.