Makita RBC2500 Owner's And Safety Manual

Also see for RBC2500: Instruction manual Original instruction manual

Contents

MOUNTING OF HANDLECAUTION: Before doing any work on the brush cutter, always stop the engine andpull the spark plug connector off the spark plug.Always wear protective gloves!CAUTION: Start the brush cutter only after having assembled it completely.RBC2500RBC2500RBC2510to EngineFor machines with Loop Handle modelsFix a barrier to the left side of the machine together with the handle for operator–protection.– Do not adjust position of the loop handle too close to the control grip.– The standard position of the handle is 200 mm to 250 mm from the hanger.For machines with U Handle modelsPlace the handle-fixing metal so that the handle with the control lever will be–positioned on the right (the right-hand grip side) as viewed from the engine side,and the other handle on the left side.Fit the groove of the handle-fixing material to the handle end. Fix provisionally the–attached metal by hexagon socket bolt supplied.Adjust the handle to an easy-to-operate position, and tighten securely the four–hexagon socket bolts uniformly on the right and left by Allen wrench.Wrap the waist pad around the shaft so that the hanger (1) will protrude through–the slit in the waist pad and the control cable and the cords (3) will also bewrapped under the waist pad (2).10