DetachmentIn case of emergency, remove the emergency detachment lever (1) by pulling–strongly with a finger. The machine sill detach from body.Be extremely careful to maintain control of the machine at this time. Do not allowthe machine to be deflected toward you or anyone in the work vicinity.WARNING: Failure to maintain complete control of the machine at all could result inserious bodily injury or DEATH.Either type I or II below is included in the tool package. Always wear the shoulderharness when operating the brushcutter.Type IAttachment of shoulder harnessAdjust the strap length so that the cutter blade will be kept parallel with the–ground.Type IIAttachment of shoulder harnessAdjust the strap length so that the cutter blade will be kept–parallel with the ground.NOTE: Be careful not to trap clothing, etc., in the buckle.DetachmentIn case of emergency, push the notches (2) at both sides,–and you can detach the machine from you.Be extremely careful to maintain control of the machine at thistime. Do not allow the machine to be deflected toward you oranyone in the work vicinity.WARNING: Failure to maintain complete control of the machineat all could result in serious bodily injury or DEATH.Hanger(1)HangerBuckle(2)CORRECT HANDLING OF MACHINE14Type IIIAttachment of shoulder harnessAdjust the strap length so that the cutter blade will be kept parallel with the–ground.DetachmentIn an emergency, push the notches (1) at both sides, and you can detach the–machine from you.Be extremely careful to maintain control of the machine at this time. Do not allowthe machine to be deflected toward you or anyone in the work vicinity.WARNING: Failure to maintain complete control of the machine at all could result inserious bodily injury or DEATH.Hanger(1)