Makita SD100D Instruction Manual

Also see for SD100D: Instruction manual Instruction manual Instruction manual Instruction manual

2 ENGLISHSPECIFICATIONSModel: SD100DLength of stroke 6 mmStrokes per minute 0 - 6,000 min -1Maximum cutting capacities Drywall 30 mmWood 15 mmRated voltage D.C. 10.8 V - 12 V maxOverall length(Depending on the battery)239 - 248 mmNet weight 1.4 - 1.6 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041BCharger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.SymbolsThe followings show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.Ni-MHLi-ionOnly for EU countriesDo not dispose of electric equipment orbattery pack together with household wastematerial!In observance of the European Directives,on Waste Electric and ElectronicEquipment and Batteries and Accumulatorsand Waste Batteries and Accumulatorsand their implementation in accordancewith national laws, electric equipment andbatteries and battery pack(s) that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.Intended useThis tool is intended for plunge-cutting of a drywall.Wood can also be cut by installing a suitable saw blade.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-11:Sound pressure level (LpA ) : 77 dB(A)Uncertainty (K) : 3 dB(A)The noise level under working may exceed 80 dB (A).NOTE: The declared noise emission value(s) hasbeen measured in accordance with a standard testmethod and may be used for comparing one tool withanother.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-2-11:Work mode: cutting drywall (thickness 30 mm)Vibration emission (a h ) : 3.0 m/s 2Uncertainty (K) : 1.5 m/s2Work mode: cutting chip board (thickness 15 mm)Vibration emission (a h ) : 5.5 m/s 2Uncertainty (K) : 1.5 m/s2