Makita TD020D Instruction Manual

Also see for TD020D: Parts list Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita TD020D Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel TD020DMachine screw 3 mm - 8 mmStandard bolt 3 mm - 8 mmHigh tensile bolt 3 mm - 6 mmCapacitiesCoarse thread 22 mm - 45 mmNo load speed (min -1) 2,300Impacts per minute 3,000Straight type 276 mmOverall length Pistol type 213 mmNet weight 0.53 kgRated voltage D.C. 7.2 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-4SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.읭 Read instruction manual.읭 Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic. GEA006-2General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your body is earthed or grounded.6. Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.7. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edges ormoving parts. Damaged or entangled cordsincrease the risk of electric shock.CdNi-MHLi-ion