Makita TD091D Instruction Manual

Also see for TD091D: Instruction manual Instruction manual

Contents

optional accessories

5ENGLISH (Original instructions)Explanation of general view1 Button2 Battery cartridge3 Switch trigger4 Lamp5 Reversing switch lever6 Bit7 Sleeve8 Bit-piece9 Standard bolt10 Fastening torque11 Fastening time12 Proper fastening torque13 High tensile bolt14 Limit mark15 Rear cover16 Screws17 Spring18 Arm19 Recessed part20 Carbon brush cap21 Lead wire22 Spacer23 HoleSPECIFICATIONS• Due to our continuing program of research and devel-opment, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ fromcountry to country.• Weight, with battery cartridge, according to EPTA-Pro-cedure 01/2003ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic.GEA010-1General Power Tool Safety WarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions for futurereference.GEB054-1CORDLESS IMPACT DRIVER SAFETYWARNINGS1. Hold power tool by insulated gripping surfaces,when performing an operation where the fas-tener may contact hidden wiring. Fasteners con-tacting a “live” wire may make exposed metal partsof the power tool “live” and could give the operatoran electric shock.2. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.3. Hold the tool firmly.4. Wear ear protectors.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product.MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.ENC009-1IMPORTANT SAFETY INSTRUCTIONSFOR BATTERY CARTRIDGE1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product using bat-tery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any conduc-tive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such as nails,coins, etc.Model TD091DCapacitiesMachine screw 4 mm – 8 mmStandard bolt 5 mm – 12 mmHigh tensile bolt 5 mm – 10 mmNo load speed (min –1 ) 0 – 2,400Impacts per minute 0 – 3,000Overall length 134 mmNet weight 0.87 kgRated voltage D.C.10.8 V