Makita TD111DSME Instruction Manual

Also see for TD111D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: TD111DFastening capacities Machine screw 4 mm - 8 mmStandard bolt 5 mm - 14 mmHigh tensile bolt 5 mm - 12 mmNo load speed Hard impact mode 0 - 3,000 min -1Soft impact mode 0 - 1,300 min -1Impacts per minute Hard impact mode 0 - 3,900 min -1Soft impact mode 0 - 1,600 min -1Rated voltage D.C. 10.8 V - 12 V maxOverall length 135 mmNet weight 0.97 - 1.1 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041BCharger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Intended useThe tool is intended for screw driving in wood, metaland plastic.NoiseThe typical A-weighted noise level determined accord-ing to EN62841:Sound pressure level (LpA) : 94 dB(A)Sound power level (LWA) : 105 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) hasbeen measured in accordance with a standard testmethod and may be used for comparing one tool withanother.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declared val-ue(s) depending on the ways in which the tool is usedespecially what kind of workpiece is processed.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (tak-ing account of all parts of the operating cycle suchas the times when the tool is switched off and whenit is running idle in addition to the trigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841:Work mode: impact tightening of fasteners of the maxi-mum capacity of the toolVibration emission (ah) : 12.5 m/s2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.

/ 60

Related manuals for Makita TD111D

Makita TD111D Instruction Manual

This manual is suitable for:

TD111D TD111DSME TD111DZ

manualsdatabase

Your AI-powered manual search engine