Makita TW008G Instruction Manual

Also see for TW007G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

5 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: TW007G TW008GFastening capacities Standard bolt M10 - M24High tensile bolt M10 - M16Square drive 12.7 mmNo load speed Max impact mode (4) 0 - 2,300 min -1Hard impact mode (3) 0 - 1,900 min -1Medium impact mode (2) 0 - 1,200 min -1Soft impact mode (1) 0 - 600 min -1Impacts per minute Max impact mode (4) 0 - 2,900 min -1Hard impact mode (3) 0 - 2,700 min -1Medium impact mode (2) 0 - 1,900 min -1Soft impact mode (1) 0 - 1,200 min -1Overall length (with battery cartridge BL4040) 170 mmRated voltage D.C. 36 V - 40 V maxNet weight 2.7 - 3.3 kg• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL4020* / BL4025* / BL4040* / BL4050F* : Recommended batteryCharger DC40RA / DC40RB / DC40RC• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Intended useThe tool is intended for fastening bolts and nuts.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-2:Model TW007GSound pressure level (LpA ) : 97 dB(A)Sound power level (LWA ) : 108 dB (A)Uncertainty (K) : 3 dB(A)Model TW008GSound pressure level (LpA ) : 97 dB(A)Sound power level (LWA ) : 108 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) mayalso be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which the tool isused especially what kind of workpiece is processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-2-2:Model TW007GWork mode: impact tightening of fasteners of the maxi-mum capacity of the toolVibration emission (a h ) : 19.7 m/s 2Uncertainty (K) : 1.5 m/s2