Makita TW140D Instruction Manual

Also see for TW140D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

7 ENGLISHNOTE: Hold the tool pointed straight at the bolt or nut.NOTE: Excessive fastening torque may damage thebolt/nut or impact socket. Before starting your job,always perform a test operation to determine theproper fastening time for your bolt or nut.NOTE: If the tool is operated continuously until thebattery cartridge has discharged, allow the tool to restfor 15 minutes before proceeding with a fresh batterycartridge.The fastening torque is affected by a wide variety offactors including the following. After fastening, alwayscheck the torque with a torque wrench.1. When the battery cartridge is discharged almostcompletely, voltage will drop and the fasteningtorque will be reduced.2. Impact socket• Failure to use the correct size impact socketwill cause a reduction in the fastening torque.• A worn impact socket (wear on the hex endor square end) will cause a reduction in thefastening torque.3. Bolt• Even though the torque coefficient and theclass of bolt are the same, the proper fasten-ing torque will differ according to the diame-ter of bolt.• Even though the diameters of bolts are thesame, the proper fastening torque will differaccording to the torque coefficient, the classof bolt and the bolt length.4. The manner of holding the tool or the materialof driving position to be fastened will affect thetorque.5. Operating the tool at low speed will cause a reduc-tion in the fastening torque.MAINTENANCECAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore attempting to perform inspection ormaintenance.NOTICE: Never use gasoline, benzine, thinner,alcohol or the like. Discoloration, deformation orcracks may result.To maintain product SAFETY and RELIABILITY,repairs, any other maintenance or adjustment shouldbe performed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONALACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regard-ing these accessories, ask your local Makita ServiceCenter.• Impact socket• Hook• Plastic carrying case• Makita genuine battery and chargerNOTE: Some items in the list may be included in thetool package as standard accessories. They maydiffer from country to country.