Makita UA003G Instruction Manual

Also see for UA003G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

10 ENGLISHSaw chain, guide bar, and sprocket combinationSaw chain type 90PXNumber of drive links 46Guide bar Guide bar length 300 mmCutting length 296 mmPitch 3/8″Gauge 1.1 mmType Sprocket nose barSprocket Number of teeth 6Pitch 3/8″Saw chain type 91PXNumber of drive links 46Guide bar Guide bar length 300 mmCutting length 296 mmPitch 3/8″Gauge 1.3 mmType Sprocket nose barSprocket Number of teeth 6Pitch 3/8″WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury mayresult.SymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Read instruction manual.Wear a helmet, goggles and ear protection.Wear protective gloves.Wear sturdy boots with nonslip soles.Steeltoed safety boots are recommended.Beware of electrical lines, risk of electricalshock.Keep distance at least 15 m.Maximum permissible cut lengthDirection of chain travelChain oil tankHot surfaces - Burns to fingers or hands.Ni-MHLi-ionOnly for EU countriesDue to the presence of hazardous com-ponents in the equipment, waste electricaland electronic equipment, accumulatorsand batteries may have a negative impacton the environment and human health.Do not dispose of electrical and electronicappliances or batteries with householdwaste!In accordance with the European Directiveon waste electrical and electronic equip-ment and on accumulators and batteriesand waste accumulators and batteries,as well as their adaptation to national law,waste electrical equipment, batteries andaccumulators should be stored separatelyand delivered to a separate collection pointfor municipal waste, operating in accor-dance with the regulations on environmen-tal protection.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Guaranteed sound power level accordingto EU Outdoor Noise Directive.Sound power level according to AustraliaNSW Noise Control Regulation.Intended useThe tool is intended for pruning branches and limbs.