Makita UH4261 Instruction Manual

Also see for UH4261: Instruction manual Technical information Instruction manual Technical information Instruction manual

Contents

7the extension cord. Working with the tool with asole hook only attached may cause an accidentand injury.Using the arm cord hook helps to minimize a risk ofcutting off the extension cord unexpectedly caused bythe loose extension cord.12009402Attach firmly the arm cord hook band placing around yourarm and pass the extension cord through the holder. Thelength of the arm cord hook band is adjustable.NOTE:• Do not pass the extension cord through the band.• Do not force the opening of the holder. Failure to doso may cause deflection and damage to it.• Using the arm cord hook together with the waistcord hook is more helpful.OPERATIONCAUTION:• Be careful not to accidentally contact a metal fenceor other hard objects while trimming. The blade willbreak and may cause serious injury.• Overreaching with a hedge trimmer, particularlyfrom a ladder, is extremely dangerous. Do not workfrom anything wobbly or infirm.007559Do not attempt to cut branches thicker than 10 mmdiameter with this trimmer. These should first be cut withshears down to the hedge trimming level.CAUTION:• Do not cut off dead trees or similar hard objects.Failure to do so may damage the tool.009403Hold the trimmer with both hands pull the switch trigger Aor B and move it in front of your body.0094031 23009404As a basic operation, tilt the blades towards the trimmingdirection and move it calmly and slowly at the speed rateof 3 - 4 seconds per meter.1009405To cut a hedge top evenly, it helps to tie a string at thedesired hedge height and to trim along it, using it as areference line.1. String1. Trimmingdirection2. Tilt the blades3. Hedge surfaceto be trimmed1. Holder2. Arm cord hookband