Makita UH4261 Technical Information

Also see for UH4261: Instruction manual Technical information Instruction manual Instruction manual Instruction manual

[3] DISASSEMBLY/ASSEMBLY[3] -3. Armature and SwitchFig. 15Fig. 17Fig. 16Fig. 18DISASSEMBLINGASSEMBLING(1) Remove Shear blade complete and Helical gear 67. (Refer to pervious pages.)(2) Switches, Switch lever A / C and Switch arm can be removed. (Fig. 15)(3) Remove Brush holders, and then separate Armature with Bearing boxcomplete from Housing L. (Fig. 16)Note: Carbon brushes can be removed without removing Brush holders.(4) Remove Bearing box complete from Armature using 1R269. (Fig. 17)(5) Remove Ball bearings 627ZZ and 6000ZZ from Armature shaft using1R269. (Fig.17)Take the disassembling step in reverse.Note: Align the groove of Switch arm with the vertical line of Housing Lagainst the bottom line. (Fig. 18)Bearing box completeBearing boxcompleteBall bearing6000ZZ (underArmature fan)ArmatureBall bearing627ZZ1R269Carbon brushesBrush holdersvertical line of Housing Lthe bottom lineof Housing LSwitch lever ASwitchSwitchSwitch lever C Switch armHousing LThe groove of Switch armmust be at vertical position.RepairP 4/ 7