Makita UH5580 Instruction Manual

Also see for UH5580: Instruction manual Instruction manual Technical information Instruction manual Instruction manual

Contents

7ENGLISHExplanation of general viewSPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to change withoutnotice.• Note: Specifications may differ from country to country.Symbols END220-1The following show the symbols used for the equipment.Be sure that you understand their meaning before use.Read instruction manual and follow thewarnings and safety instructions.Wear eye protection.Wear ear protection.DOUBLE INSULATIONCaution: particular care and attentionrequired!Caution: withdraw the mains plugimmediately if the cable is damaged!Protect against rain and damp!Wear safety gloves!Withdraw the mains plug!First aidRecyclingCE marking............. Prohibited!Intended use ENE014-1The tool is intended for trimming hedges.General Power Tool SafetyWarnings GEA005-2WARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term “power tool” in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered or darkareas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can cause youto lose control.1. Switch trigger B2. Switch trigger A3. Switch trigger C4. Hook complete5. Tool’s cord6. Extension cord7. Hook8. Tool9. Holder10. Waist cord hook11. Cord12. Arm cord hook13. Trimming direction14. Tilt the blades15. Hedge surface to be trimmed16. Press17. Chip receiver18. Nut19. Shear blade20. Branch catcher21. Hooks22. Fit the hooks into groove23. Grooves24. Press the hooks on both sides25. Unlock the hooks26. Screws27. Blade cover28. Under cover29. Gear housing cover30. Crank31. Ellipse of shear bladeModel UH5580 UH6580 UH7580Blade length 550 mm 650 mm 750 mmStrokes per minute (min -1 ) 1,500 1,500 1,500Overall length 970 mm 1.049 mm 1,157 mmNet weight 4.2 kg 4.3 kg 4.4 kgSafety class /II