Makita UM164D Instruction Manual

Also see for UM164D Series: Instruction manual Instruction manual Instruction manual Instruction manual Technical information

Contents

7and returned to an environmentallycompatible recycling facility. ENE015-1Intended useThe tool is intended for cutting lawn edges or sprouts.ENG905-1NoiseThe typical A-weighted noise level determined accordingto IEC60335:Sound pressure level (LpA) : 75.9 dB(A)Uncertainty (K) : 2.5 dB(A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to IEC60335:Vibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).Hedge trimming operation with optional hedge shearblades ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 73.7 dB(A)Uncertainty (K) : 2.5 dB(A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Vibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH003-14For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless Grass ShearModel No./ Type: UM164Dare of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60335, EN60745The technical documentation is kept by:Makita International Europe Ltd.Technical Department,Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England27.7.2011000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN