Makita UT001GM102 Instruction Manual
Also see for UT001G: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                |
7 ENGLISHPREPARATIONBEFORE USEIndicating the remaining batterycapacityPress the check button on the battery cartridge to indi-cate the remaining battery capacity. The indicator lampslight up for a few seconds.12Fig.3► 1. Indicator lamps 2. Check buttonIndicator lamps RemainingcapacityLighted Off Blinking75% to 100%50% to 75%25% to 50%0% to 25%Charge thebattery.The batterymay havemalfunctioned.NOTE: Depending on the conditions of use and theambient temperature, the indication may differ slightlyfrom the actual capacity.NOTE: The first (far left) indicator lamp will blink whenthe battery protection system works.Things you need to know before useHold the handle when using or carrying the tool.Fig.4CAUTION: Do not hold the sheet metal part.Sharp areas may cause injury.Tool / battery protection systemThe tool is equipped with a tool/battery protection sys-tem. This system automatically cuts off power to themotor to extend tool and battery life. The tool will auto-matically stop during operation if the tool or battery isplaced under one of the following conditions:Overload protectionWhen the tool/battery is operated in a manner thatcauses it to draw an abnormally high current, the toolautomatically stops. In this situation, turn the tool offand stop the application that caused the tool to becomeoverloaded. Then turn the tool on to restart.Overheat protectionWhen the tool/battery is overheated, the tool stopsautomatically. In this situation, let the tool/battery coolbefore turning the tool on again.Overdischarge protectionWhen the battery capacity becomes low, the tool stopsautomatically. If the product does not operate evenwhen the switches are operated, remove the batteriesfrom the tool and charge the batteries. |
Related manuals for Makita UT001G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine