Makita WT001G Instruction Manual

Also see for WT001G: Instruction manual Instruction manual

10 ENGLISHNOTICE: Washer and nut have head and tail.Head has identification mark for nut and chamferfor washer. When placing them, be careful not toplace in reverse.12 345Fig.16► 1. Identification mark 2. Nut 3. Bolt 4. Chamfered5. WasherNOTICE: Replace nut, bolt and washer alltogether at one time when these rotate together,nut rotates excessively or a bolt protrude fromnut surface too much or less.NOTICE: Do not reuse used nut, bolt and washer.MAINTENANCECAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore attempting to perform inspection ormaintenance.NOTICE: Never use gasoline, benzine, thinner,alcohol or the like. Discoloration, deformation orcracks may result.To maintain product SAFETY and RELIABILITY,repairs, any other maintenance or adjustment shouldbe performed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONALACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regard-ing these accessories, ask your local Makita ServiceCenter.• Outer sleeve• Inner sleeve• Makita genuine battery and chargerNOTE: Some items in the list may be included in thetool package as standard accessories. They maydiffer from country to country.MAKITA LIMITEDWARRANTYPlease refer to the annexed warranty sheet for themost current warranty terms applicable to this product.If annexed warranty sheet is not available, refer to thewarranty details set forth at below website for yourrespective country.United States of America: www.makitatools.comCanada: www.makita.caOther countries: www.makita.com