Makita XCS06 Instruction Manual

5ENGLISHENGLISH (Original instructions)Before installing and operating this machine, read, understand and follow allinstructions and operating procedures. Keep this Instruction Manual with themachine.Read, understand and follow all safety instructions and operatingprocedures. If you do not understand the instructions, or if condi-tions are not correct for proper operation, DO NOT OPERATE THEMACHINE. Consult your supervisor or other responsible person.SPECIFICATIONSModel: XCS06Voltage D.C. 18 VWeight 4.0 kg (8.82 lbs)Dimensions (L x W x H) 471 mm x 137 mm x 139 mm / 18-17/32″ x 5-25/64″ x 5-15/32″ (excluding a handle)Cutting Capacity of a rebar(620 N/mm2 / 90,000 psi )φ10 to φ25 mm (SD490)3/8″ to 1″ (Grade 60)No load speed 2200 min -1External Diameter of Blade 110 mm / 4.3″Battery cartridge BL1830B / BL1840B / BL1850B / BL1860BCharger DC18RC / DC18RD / DC18RE / DC18SE / DC18SF / DC18SD• Specifications and design may be subject to change without prior notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.WARNINGRead and understand this instruction manual beforeoperating this machine. Failure to follow operatinginstructions could result in death or serious injury.WARNING LABELS RELATED TOSAFETYFlying debris and loud noise hazards. Wear ear andeye protection.Moving blade. Keep hands clear while machine isoperating. Turn power off before servicing.SAVE THESE INSTRUCTIONSMeaning of “caution” and “warning” indicationsCaution: Indicates a potentially hazardous situationwhich, if not avoided, may result in minoror moderate injury. This is also used toalert against unsafe practices associatedwith events that could lead to personalinjury.Warning: Indicates a potentially hazardous situationwhich, if not avoided, will result in death orserious injury.*** Makita shall not be responsible for any inci-dental damages or personal injuries result-ing from negligence of Warnings and SafetyInstructions contained in the InstructionManual.IMPORTANT SAFETYINSTRUCTIONS• The “important safety instructions” describedbelow should always be followed to reduce therisk of a fire, electric shock, and personal injury.• Before operating the machine, read and carefullyfollow these instructions.• This manual should be retained for futurereference.