Makita XDT16 Instruction Manual

2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: XDT16Fastening capacities Machine screw 4 mm - 8 mm (5/32" - 5/16")Standard bolt 5 mm - 16 mm (3/16" - 5/8")High tensile bolt 5 mm - 14 mm (3/16" - 9/16")No load speed (RPM) Max impact mode 0 - 3,600 /minHard impact mode 0 - 3,200 /minMedium impact mode 0 - 2,100 /minSoft impact mode 0 - 1,100 /minWood mode 0 - 1,800 /minBolt mode 0 - 3,600 /minT mode (1) 0 - 2,900 /minT mode (2) 0 - 3,600 /minImpacts per minute Max impact mode 0 - 3,800 /minHard impact mode 0 - 3,600 /minMedium impact mode 0 - 2,600 /minSoft impact mode 0 - 1,100 /minWood mode 0 - 3,800 /minBolt mode 0 - 3,800 /minT mode (1) -T mode (2) 0 - 2,600 /minRated voltage D.C. 18 VOverall length 116 mm (4-9/16″)Net weight 1.2 - 1.5 kg (2.7 - 3.4 lbs)• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860BCharger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.