Maktec MT064 Instruction Manual

Also see for MT064: User guide Instruction manual Instruction manual Instruction manual

Contents

Maktec MT064 Instruction Manual Manual pdf 4 page image

4out with clear water and seek medicalattention right away. It may result in loss ofyour eyesight.ADDITIONAL SAFETY RULESFOR CHARGER & BATTERYCARTRIDGE1. Do not charge battery cartridge whentemperature is BELOW 10 ﾟ C (50 ﾟ F) or ABOVE40 ﾟ C (104 ﾟ F).2. Do not attempt to use a step-up transformer,an engine generator or DC power receptacle.3. Do not allow anything to cover or clog thecharger vents.4. Always cover the battery terminals with thebattery cover when the battery cartridge is notused.5. Do not short the battery cartridge:(1) Do not touch the terminals with anyconductive material.(2) Avoid storing battery cartridge in acontainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns andeven a breakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 ﾟ C (122 ﾟ F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop, shake or strike battery.9. Do not charge inside a box or container of anykind. The battery must be placed in a wellventilated area during charging. END004-2SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before adjusting orchecking function on the tool.Installing or removing battery cartridge12003948• Always switch off the tool before insertion orremoval of the battery cartridge.• To remove the battery cartridge, withdraw it fromthe tool while pressing the buttons on both sides ofthe cartridge.• To insert the battery cartridge, align the tongue onthe battery cartridge with the groove in the housingand slip it into place. Always insert it all the wayuntil it locks in place with a little click. If not, it mayaccidentally fall out of the tool, causing injury toyou or someone around you.• Do not use force when inserting the batterycartridge. If the cartridge does not slide in easily, itis not being inserted correctly.Switch action1003950CAUTION:• Before inserting the battery cartridge into the tool,always check to see that the switch triggeractuates properly and returns to the "OFF" positionwhen released.1. Switch trigger1. Button2. Battery cartridge