Maktec MT450T Instruction Manual

Also see for MT450: Instruction manual Instruction manual Instruction manual

Contents

Maktec MT450T Instruction Manual Manual pdf 4 page image

4ENGLISH (Original instructions)Explanation of general viewSPECIFICATIONS• Due to our continuing program of research and development, the specifications herein are subject to change withoutnotice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003Intended use ENE021-1The tool is intended for sawing wood, plastic, metal andbuilding materials with a strong impact. It is suitable forstraight and curved cutting.Power supply ENF002-2The tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire.General Power Tool SafetyWarnings GEA010-1WARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.RECIPRO SAW SAFETYWARNINGS GEB008-61. Hold power tool by insulated gripping surfaces,when performing an operation where the cuttingaccessory may contact hidden wiring or its owncord. Cutting accessory contacting a “live” wire maymake exposed metal parts of the power tool “live” andcould give the operator an electric shock.2. Use clamps or another practical way to secure andsupport the workpiece to a stable platform. Holdingthe work by hand or against your body leaves itunstable and may lead to loss of control.3. Always use safety glasses or goggles. Ordinaryeye or sun glasses are NOT safety glasses.4. Avoid cutting nails. Inspect workpiece for anynails and remove them before operation.5. Do not cut oversize workpiece.6. Check for the proper clearance beyond theworkpiece before cutting so that the blade will notstrike the floor, workbench, etc.7. Hold the tool firmly.8. Make sure the blade is not contacting theworkpiece before the switch is turned on.9. Keep hands away from moving parts.10. Do not leave the tool running. Operate the toolonly when hand-held.11. Always switch off and wait for the blade to cometo a complete stop before removing the blade fromthe workpiece.12. Do not touch the blade or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.13. Do not operate the tool at no-load unnecessarily.14. Always use the correct dust mask/respirator forthe material and application you are working with.15. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalation andskin contact. Follow material supplier safety data.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product (gainedfrom repeated use) replace strict adherence to safety1. Shoe2. Shoe button3. Switch trigger4. Lock button5. Blade clamp sleeve6. Fixed position7. Released position8. Blade9. Blade clamp lever10. Hex wrench11. Screw12. Pin13. Blade clamp14. Hole15. Insulation cover16. Limit mark17. Brush holder cap18. ScrewdriverModel MT450T MT450Length of stroke 28 mm 28 mmMax. cutting capacities Pipe 130 mm 130 mmWood 255 mm 255 mmStrokes per minute (min -1) 0 - 2,800 0 - 2,800Overall length 457 mm 457 mmNet weight 3.2 kg 3.1 kgSafety class /II