Maktec mt581 Instruction Manual

Contents

Maktec mt581 Instruction Manual Manual pdf 2 page image

2SPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice.• Note: Specifications may differ from country to country.SYMBOLS END201-1The following show the symbols used for the tool. Besure that you understand their meaning before use....................Read instruction manual....................DOUBLE INSULATIONIntended useThe tool is intended for performing lengthways andcrossways straight cuts and mitre cuts with angles inwood while in firm contact with the workpiece.Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated in accordance with EuropeanStandard and can, therefore, also be used from socketswithout earth wire.Model MT581Blade diameter 185 mmMax. cutting depth at 90° 64 mmat 45° 42 mmNo load speed (min-1 ) 4,700Overall length 299 mmNet weight 3.4 kgSafety class /II