Malibu Boats AirMAX 240 Installation & Configuration Manual
                                                                                  | |
Contents
| 
Testing BTS to CPE Wireless 47Installation and Configuration3 Configurationthat you ve entered what you really want andhave typed it correctly.3. When you re sure that you ve got the correctusername and password, then click on the APPLYbutton only then will the changes be made tothe system.Note: Always write down username and passwordchanges and store them in a secure place, so you can findthem later in the event you forget what they are.Testing BTS to CPE Wireless CommunicationsTesting a basic system consists of pinging the BTS andthen the CPE. To test with a Windows PC (othercomputers and OS platforms also have Ping utilitiesavailable, but the exact steps will vary):1. Connect a Windows PC to the BTS as describedearlier in Configuring a BTS and then run a DOSwindow. On most Windows PCs, you will go to theStart button, look under Programs and thenselect MS-DOS or MS-DOS Prompt .2. Ensure that the BTS and CPE are not on thesame LAN, so they can only communicate via thewireless link.3. In the DOS window ping the CPE IP address setearlier during BTS configuration. For example, ifthe IP address for the CPE is 206.112.23.2, thenenter:>ping 206.112.23.2 RETURN4. If it pings successfully, you have connectivitybetween the PC and the BTS. If it times-out anddoes not ping, ensure you are using the correct IPaddresses and review the configuration data andphysical installation. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine