Malm Fireplaces Zircon 34 Assembly And Installation Instructions Manual

Also see for ZIRCON 34: Assembly and installation instructions Assembly and installation instructions

Contents

Malm Fireplaces Zircon 34 Assembly And Installation Instructions Manual Manual pdf 8 page image

MAINTENANCE INSTRUCTIONSGENERAL SAFETY1. Always shut off the gas supply and make sure that the heater is cool before startingany servicing operation.2. Always check for leaks after servicing.3. Always check for correct combustion and ventilation air flow. The flow of combustionair and ventilation air must not be obstructed.4. Always check that the appliance area is clear and free from combustible materials, gasoline, andother flammable vapors and liquids.PERIODIC CHECKS1. Keep the burner and control compartment clean by brushing and vacuuming at least once a year.2. The flame pattern should be checked periodically. The flame color should be blue with yellow tips.If needed adjust the air shutter to provide a proper flame. See Figure F.3. A qualified service person should Inspect the appliance vent system prior to use and at leastannually, to ensure that the flow of combustion air is not obstructed.4. If you are unsure how to perform these maintenance procedures have a qualified field serviceperson check the unit at least annually.NOTE: During the first few fires the odor of paint or oils remaining from manufacturing are likely torelease an odor. This is normal and will stop as soon as the paint has cured.5. If for any reason a log should break it must be replaced with the same log. See the log diagramfor the exact replacement log needed. The position of the logs must be as shown in the diagram.CARE OF FINISH1. The matte black finish can be wiped clean with a damp cloth. If the finish becomes marred orscratched it may require touch up spraying. Use Stove Bright Flat Black spray. This is availablefrom your dealer or from Malm direct.2. If your unit is porcelain enamel use any glass cleaner to wipe the unit clean. Minor scratches canbe polished with most nonabrasive auto polish. If the porcelain should become chipped orseverely damaged an enamel touch up is available from your dealer or Malm direct.Page - 8

/ 10

Related manuals for Malm Fireplaces ZIRCON 34