Mamiya RB67 Pro SD User Manual

Contents

Mamiya RB67 Pro SD User Manual Manual pdf 19 page image

9. Loading the Film Holder1. While pressing the back cover, pull out theupper and lower back cover latches and theback cover will open. Remove the film insert.When loading film, avoid direct sunlight:either load the film in the shade or turn yourbody away from the sun and load it in theshade of your own body.Use 120 roll film with the 120 roll film holderand 220 roll film with the 220 roll film holder.2. While pressing the spool release pin (A) onthe left side of the film insert, insert a new rollof film on the film spool stud.Load the film so that the leader paper canbe pulled out along the arrow of the leaderpaper guide mark (B). Wind the film with theprinted side of the leader paper on the holder’spressure plate side. If the printed side doesnot lace the pressure plate side, reload thefilm, reversing the film position.3. Pull out the leader paper and insert the tipinto the groove of the take-up spool.* Position the film so that the leader paperwinds evenly between the spool flanges-if itis uneven, film and photo malfunctions mayoccur.17