Section 2 Installation References2-9REMOTE ELECTRICAL CONNECTIONSWARNINGThese diagrams are not intended to show properwire routing, wire sizing, disconnects, etc., onlythe correct wire connections.All electrical work, including wire routing andgrounding, must conform to local, state andnational electrical codes.NOTE: The single circuit condenser should be wireddirectly to the ice machine’s electrical panel. Thecondenser fan runs only when the ice machine isoperating.Remote Ice MachineWith Single Circuit Model Condenser115/1/60 or 208-230/1/60Remote Ice MachineWith Single Circuit Model Condenser208-230/3/60 or 380-415/3/50Remote Ice MachineWith Single Circuit Model Condenser230/1/50SV1255SV1256SINGLECIRCUITREMOTECONDENSER GROUNDL 1N = 115V OR L2 = 208-230VTO SEPARATEFUSE/ BREAKERICEMACHINEL 2L 1L 2F 2F 1GROUND GROUNDL 1L 2NOTE:CONDENSER FANMOTOR VOLTAGEMATCHES ICE MACHINEVOLTAGESV1199SINGLECIRCUITREMOTECONDENSER GROUNDL 1TO SEPARATEFUSE/ BREAKERICEMACHINEL 2L 1L 2F 2F 1GROUND GROUNDL 1L 2NOTE:FAN MOTORIS 208-230VL 3 L 3SINGLECIRCUITREMOTECONDENSER GROUNDL 1ICEMACHINEL 2L 1NF 2F 1GROUND GROUNDL 1NNOTE:FAN MOTOR IS220-240 VOLTTO SEPARATEFUSE/BREAKER (220-240).DISCONNECT ALL POLES.
