Manitowoc K00017 Installation Instructions Manual

Contents

installation instructions

K00017 STACKING KITInstallation Instructions1. The K00017 stacking kit is used for stacking an E-0400on an E-0600 ice machine. The bin must be leveledbefore proceeding. NOTE: THIS STACKING KIT ISALSO USED, WHEN STACKING G-0600 ON G-0800ICE MACHINES.2. INSTALLATION OF E-0600 ICE MACHINE:A. See service manual for uncrating and inspection ofice machine.B. Remove top cover from ice machine (NOTE: do notput screws back in.).C. Set ice machine carefully and squarely on bin.D. Position shim angle, provided in kit, on right side, asshown in Illustration 1.E. Add foam tape, as shown in Illustration 1.F. With four screws, install top cover from kit on leftside of ice machine (NOTE: flange goes over sidepanel.).G. Remove right-hand side panel.3. INSTALLATION OF E-0400 ICE MACHINE:A. See service manual for uncrating and inspection ofice machine.B. Remove right-hand side panel and bottom fourscrews on left-hand side panel.C. Set E-0400 ice machine on E-0600 ice machine withright-hand sides in line (NOTE: flange on top covershould be inside left-hand side panel.).D. Install four screws in bottom left-hand side panel.E. Bolt right-hand sides of ice machines together with1/4-20 x 5/8” long bolt, lock washer, and nut,provided in kit.F. Reattach right-hand side panels.4. INSTALLATION OF WATER SHIELD:A. Remove angle “A”, the water pump, float valvebracket assembly, and sump trough from top icemachine.B. Remove existing sheet metal screw at lower rightcorner of bulkhead below siphon tube. Locate watershield above the lower machine’s electrical box. Useexisting screw to fasten flange of shield to bulkhead.Apply RTV sealant to the top edges of flange toprovide a watertight seal.C. Reinstall the sump trough, float valve bracketassembly, and water pump.5. INSTALLATION OF ICE CHUTE:A. Remove the ice chute from kit and set bottommounting brackets over angle “B” on E-0600 icemachine (Illustration 3).B. Put angle “A” in slots of top mounting brackets andsecure in place.C. Check for free movement of water curtains.D. Proceed to ice machine service manuals for electricaland water hook-up and start-up procedure.Manitowoc Ice, Inc.2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USATelephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8001403Web Site - www.manitowocice.com Rev. 05/11/01

/ 1

Related manuals for Manitowoc K00017