Manitowoc KH0177 - IB-0620 Installation Instructions Manual

Also see for IB-0620: Installation instructions Installation instructions Installation instructions Installation instructions Installation instructions

KH0177 - IB-0620/0820/1020ON A CORNELIUS ABS OR ED150 ICE DISPENSERInstallation Instructions1. Set adapter and bin cover on dispenser. Position the bin cover so that the front flange of the bin cover will lock underthe front lip of the dispenser. Adapter may have to be moved towards the back of the dispenser.2. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter.5. Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit.6. Set the front bin cover onto the dispenser. The back flange of the bin cover will latch onto the adapter.7. Rotate retaining arms into position, as shown for normal ice machine operation.Manitowoc Ice, Inc.2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USATelephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8006733Web Site - www.manitowocice.com Rev. 06/17/03#8 Screw4 PlacesRH Retaining ArmBin Cover#8-32 Screw2 PlacesAdapterLH Retaining ArmPlace a large fillet of RTVinside edge along both sideswhere adapter touches bin

/ 1

Related manuals for Manitowoc IB-0620