Manitowoc Q Q160 Installation Use And Care Manual

Contents

Manitowoc Q Q160 Installation Use And Care Manual Manual pdf 12 page image

1-6General Information Section 1Adjusting the Coin Mechanism for Canadian CoinsImportantCanadian quarters are magnetic. Therefore themagnet inside the coin mechanism must beremoved so Canadian quarters will drop throughthe coin mechanism.1. Remove the front panel of the dispenser. Thecoin mechanism can be changed while in place inthe dispenser door, as shown above.2. Pivot the coin magnet housing section away fromthe rest of the coin mechanism.3. Using a small screwdriver, loosen the set screwwhich holds an aluminum plate in the coinmagnet housing.4. Remove the aluminum plate.5. Using a metal screwdriver tip, pull out the magnetfrom the magnet housing. (The backside of themagnet has the stronger magnetic attraction.)6. The aluminum plate and magnet have now beenremoved from the coin magnet housing. Pivot theempty coin magnet housing section back intoplace.7. Reinstall the front door of the dispenser.