Manitowoc QM30 Series Installation And Use Manual

Also see for QM30 Series: Technician's handbook Technician's handbook Technician's handbook Installation and use guide Installation, operation and maintenance manual

Contents

Maintenance4-4Section 4WATER PUMPPOWER CORDOUTLETB. Remove the Overflow Tube• To remove the tube, lift it up while using a slightback and forth motion to loosen it from the drainhole.When installing the tube, be sure it is completelyinserted into the drain hole to prevent water leakageduring normal operation.Removing the Overflow TubeC. Remove the Vinyl Hose• Disconnect the water pump discharge hose fromthe distribution tube and water pump.D. Remove the Water Pump• Disconnect the water pump power cord.• Disconnect the water hose from the pump outlet.• Loosen the screws that hold the water pump inplace.• Lift the water pump and bracket assembly up andoff the screws.Removing the Water PumpE. Remove the Water Trough• Remove the screws holding the water trough tothe walls of the cabinet.sv1713OVERFLOWTUBEDRAINHOLESCREWSsv1684b