Manitowoc UDE065A Technician's Handbook

Also see for NEO UD0140A: Technician's handbook Installation, operation and maintanance manual Technician's handbook Installation, operation and maintenance

Contents

Part Number 000014797 Rev02 05/18 189Ice Thickness Float Switch:A. The light must be off in the down position.B. The light must be on in the up position.If the control board light does not respond to the floatproceed with step 1 below.1. Disconnect power to the ice machine, pull the wireconnector for the float switch through the bulkheadand disconnect.2. Attach an ohm meter lead to each float switch wire.3. Place the float in the down position - The float switchmust be closed.4. Place the float in the up position - The float switchmust be open.FLOAT CLOSED FLOAT OPENNOTE: Make adjustments with the ice machine in the offposition. Making adjustments during the freeze cycle mayproduce an initial sheet of ice that is thicker than futurecycles.Float Float Up Float DownIce Thickness Float OL < 1 OhmHarvest Float OL < 1 Ohm